After installing UGODE’s digital cluster, some vehicle models may display fault codes, which can be cleared.
Quickly match the fault code：
1: Turn off the headlights to status “0”, close all doors, and fasten your seat belt.
2: Start the engine and manually turn on the headlights (turn to the right to low beam).
3: Turn on the front fog lights, then quickly toggle the high beam switch lever at least 5 times.
After performing the above steps, if the daytime running lights on the instrument panel flash rapidly, the operation was successful. Otherwise, turn off the engine, turn off the ACC, and repeat steps 1/2/3.
Note:
1. The above operations must be performed continuously, without long intervals.
2. If the above methods fail to clear the fault code, please visit a 4S store to have it cleared.
Post time: Aug-16-2025