After installing the UGODE BMW digital cluster, the fuel tank capacity needs to be set correctly, otherwise the fuel tank will display an error.
How to find the fuel tank capacity:
1. Fill your vehicle’s gas tank.
2. Start the engine before beginning setup.
3. Press and hold the button in the lower left corner of the original instrument panel, select 10 Unlock, and tap to enter.
4. Add the last five digits of the vehicle’s chassis number (for example, as shown below: 5+1+9+0+6 = 21), enter 21 in the CODE field, and then press the Exit button.
5. Select the 13 Tank menu and click Enter.
6. Round off the Tank, Left value of 36.5L to 37L and enter it in the UGODE digital cluster main fuel tank setting.
7. Fill in Tank, right 30L into the sub-tank item of the UGODE digital cluster.
UGODE digital cluster fuel tank capacity setting steps:
Operate via the original vehicle’s “BC” button (short press for selection, long press for confirmation.)
Route: System Settings – Factory Settings (Password: 0188) – Fuel Tank Settings
If you do not obtain the original fuel tank capacity value before installation, you can refer to the following table for settings.
Post time: Aug-15-2025